Glass reactor use and maintenance

Glass reactor use and maintenance

Glass reactor is a commonly used biochemical instrument. It is widely used in modern fine chemical, biopharmaceutical, scientific research and other industries. It can be concentrated, distilled, retained, separated and purified under constant speed, constant force and constant temperature. It is the ideal instrument for teaching, experiment, pilot test and production.

Glass reactor maintenance instructions :

1. Check the instrument carefully before use to see if the glass body is damaged and the interface is consistent.

2. Wipe each interface with a clean soft cloth, then apply a little vacuum grease (make sure to cover the vacuum grease to prevent the sand from entering), and rotate the interface to make the vacuum grease at the interface uniform.
3. The interfaces should not be tightened too tightly. It should be loosened regularly to avoid long-term tight locking and cause the connector to bite.
4. Turn on the power switch first, then let the machine run from slow to fast. When the machine is stopped, stop the machine and turn off the switch.
5, the PTFE switch everywhere can not be tightened too much, easy to damage the glass.
6. Every time you use it, you must use a soft cloth to clean all kinds of oil traces left on the surface of the machine, stains, solvent remaining, and keep it clean.
7. Loosen the PTFE switches after stopping, and the PTFE piston will be deformed when it is still working for a long time.
8. Regularly clean the sealing ring by removing the sealing ring and checking if there is dirt on the shaft. Wipe it with a soft cloth, then apply a little vacuum grease and reinstall it to keep the shaft and seal ring smooth.
9, the electrical part must not enter the water, it is strictly prohibited to get wet.
10, must purchase the original authentic accessories, free use of other accessories can cause fatal damage to the machine.
11. When doing any repairs or inspections on the machine, be sure to cut off the power supply and water source.

Room Thermostat

According to the temperature change of the working environment, the thermostat will have some physical deformations within the switch, resulting in some special effect. The thermostat will cause a series of automatic control element of turning off and turning on, which is also called temperature control switch, temperature controller, temperature protector, referred to the thermostat. Through thermal protector, the temperature protector will send the temperature to the thermostat and the thermostat will send the commands to control the operation of the device in order to achieve the desired temperature and the energy saving effect. Now the thermostat are widely used in thermostat application appliances, motors, cooling, heating and many other products.

The working principle of the thermostat is automatically sampling, real-time monitoring through the temperature sensor. The control circuit starts when the ambient temperature is higher than the control set point. If the temperature still rise, when the temperature rose to over-limit alarm set point, the thermostat start limit alarm function. When temperature control can not be effectively controlled in order to prevent destruction of the device also can be stopped by the trip device features continue to run.

According to the function of the working,the thermostat have different types:intelligent thermostat,remote controlled thermostat,programmable thermostat,wireless room thermostat.



Room Thermostat,Auto Thermostat,Intelligent Thermostat,Remote Controlled Thermostat,Programmable Thermostat,Wireless Room Thermostat

Berggruen Technology Co.,Ltd , https://www.meter-technology.com