The dehydration performance of the fungus tube is rough surface, hand feels a tingling touch, and the quality is significantly reduced.
(1) The main reasons are as follows: (1) The bacteria bags in the bacteria-producing stage are exposed to strong light, or inoculated with adhesive tape, and the moisture in the bags evaporates; (2) The dry hot air is attacked when the bag is removed, the mycelium breaks, the nutrient matrix flows out, and the surface of the bacteria barrel is dried. (3) The wet and dry contrast between the cultivation site and the mycelium is large and occurs mostly in the dry land mushroom farm. Because of its low humidity, the moisture of the fungus tube is absorbed by the ground; 4 the bacteria bed film has poor moisturizing conditions, such as the old film has holes, or The cover film is not tight, resulting in the air flow in the mushroom bed is too smooth; 5 improper ventilation, remove the film for a long time, affected by dry hot wind.
(2) The measures taken are: (1) Dehydration should increase the amount of water sprayed on the fungus tube for 2 consecutive days to reach the level of hand touch without soft feeling; (2) Cover the film tightly, shorten the ventilation time, and maintain the relative humidity. 90%; 3 can be filled with "Happy Valley water" in the ditch on both sides of the mushroom bed, increase the humidity on the ground.
(1) The main reasons are as follows: (1) The bacteria bags in the bacteria-producing stage are exposed to strong light, or inoculated with adhesive tape, and the moisture in the bags evaporates; (2) The dry hot air is attacked when the bag is removed, the mycelium breaks, the nutrient matrix flows out, and the surface of the bacteria barrel is dried. (3) The wet and dry contrast between the cultivation site and the mycelium is large and occurs mostly in the dry land mushroom farm. Because of its low humidity, the moisture of the fungus tube is absorbed by the ground; 4 the bacteria bed film has poor moisturizing conditions, such as the old film has holes, or The cover film is not tight, resulting in the air flow in the mushroom bed is too smooth; 5 improper ventilation, remove the film for a long time, affected by dry hot wind.
(2) The measures taken are: (1) Dehydration should increase the amount of water sprayed on the fungus tube for 2 consecutive days to reach the level of hand touch without soft feeling; (2) Cover the film tightly, shorten the ventilation time, and maintain the relative humidity. 90%; 3 can be filled with "Happy Valley water" in the ditch on both sides of the mushroom bed, increase the humidity on the ground.