First, the selection of species with high bud rate, full buds, suitable size, color, and pest-free white meat ginger species. It is best to open the whole ginger gingerly for each bud. If there are more than 32 sprouts per kilogram of ginger, it is better to shoot.
Second, the germination buds will be opened immediately by the ginger block immediately stained with a layer of ash to disinfect, and then select the sunny drying 1-2 days, and flip 1-2 times, and then piled ginger seeds stack (generally piled no more than 10 Centimeter) in the room, the amount of water spray, cover the sand and other insulation moisturizing. The heap temperature is maintained at 25 °C. Until most sprouts of ginger are still rooted, they can be sowed.
Third, the row of seedlings will be arranged 50 cm layer spacing, surrounded by brick walls as a bed. The fertile sand with good moisturizing properties was used as bed soil. The bottom of the bed was tiled with 475 cm thick fine sand. The buds were lined up with ginger seeds, 20-25 kg of ginger per square meter, and covered with 5 cm thick sand.
Fourth, spray the ginger immediately after the row of water spray, the amount of water to wet through the bed soil is appropriate. When most of the ginger shoots are unearthed, the second time the water is sprayed according to the dry and wet conditions of the bed soil, the amount of water is preferably wet sand. During the entire period of birth, we must keep the bed moist, but do not collect water, indoor humidity is maintained at 80% to 90%. After the water spray, the ginger block around the bud bed and the top surface is covered with fine sandy soil. The thickness of the fine sand above the ginger seed is not less than 5 cm.
Fifth, the suitable temperature for temperature-regulating ginger buds is 23~30°C. In order to promote more germination and faster germination, before the ginger shoots are unearthed, the temperature of the bed is controlled at 25~28°C; after the ginger shoots are unearthed, the height of the seedlings is maintained at 28~30°C before being kept at a height of 30 cm, and then maintained at about 25°C. When the temperature is low, it is necessary to cover the film, straw, etc. to increase the temperature; when the temperature is high, measures can be taken to open the doors and windows, and spray water on the ground and space to cool down.
Six, ventilated ginger seeds go to bed, the indoor general seal is not ventilated. After budding, especially in the days before harvesting, proper ventilation should be adopted according to the appearance of buds to improve the quality of buds.
7. Harvesting generally takes 40 to 45 days after the ginger seeds go to bed. When the sprouts are about 30 cm high, harvesting is appropriate. Harvesting method: Use a short spatula to remove the ginger, and then the sprouts on the ginger block can be removed.
Eight, the root will be removed from the processing of ginger roots fibrous roots, and then the ginger sprouts 30 cm away from the top bud seedlings cut off, and finally wash the ginger sprouts on the soil, with a diameter of 1 cm cylindrical ring knife nesting Ginger sprouts were cut off ginger kim sprouts, made of semi-finished products with a root diameter of 1 cm and a length of 2.5 cm.
Second, the germination buds will be opened immediately by the ginger block immediately stained with a layer of ash to disinfect, and then select the sunny drying 1-2 days, and flip 1-2 times, and then piled ginger seeds stack (generally piled no more than 10 Centimeter) in the room, the amount of water spray, cover the sand and other insulation moisturizing. The heap temperature is maintained at 25 °C. Until most sprouts of ginger are still rooted, they can be sowed.
Third, the row of seedlings will be arranged 50 cm layer spacing, surrounded by brick walls as a bed. The fertile sand with good moisturizing properties was used as bed soil. The bottom of the bed was tiled with 475 cm thick fine sand. The buds were lined up with ginger seeds, 20-25 kg of ginger per square meter, and covered with 5 cm thick sand.
Fourth, spray the ginger immediately after the row of water spray, the amount of water to wet through the bed soil is appropriate. When most of the ginger shoots are unearthed, the second time the water is sprayed according to the dry and wet conditions of the bed soil, the amount of water is preferably wet sand. During the entire period of birth, we must keep the bed moist, but do not collect water, indoor humidity is maintained at 80% to 90%. After the water spray, the ginger block around the bud bed and the top surface is covered with fine sandy soil. The thickness of the fine sand above the ginger seed is not less than 5 cm.
Fifth, the suitable temperature for temperature-regulating ginger buds is 23~30°C. In order to promote more germination and faster germination, before the ginger shoots are unearthed, the temperature of the bed is controlled at 25~28°C; after the ginger shoots are unearthed, the height of the seedlings is maintained at 28~30°C before being kept at a height of 30 cm, and then maintained at about 25°C. When the temperature is low, it is necessary to cover the film, straw, etc. to increase the temperature; when the temperature is high, measures can be taken to open the doors and windows, and spray water on the ground and space to cool down.
Six, ventilated ginger seeds go to bed, the indoor general seal is not ventilated. After budding, especially in the days before harvesting, proper ventilation should be adopted according to the appearance of buds to improve the quality of buds.
7. Harvesting generally takes 40 to 45 days after the ginger seeds go to bed. When the sprouts are about 30 cm high, harvesting is appropriate. Harvesting method: Use a short spatula to remove the ginger, and then the sprouts on the ginger block can be removed.
Eight, the root will be removed from the processing of ginger roots fibrous roots, and then the ginger sprouts 30 cm away from the top bud seedlings cut off, and finally wash the ginger sprouts on the soil, with a diameter of 1 cm cylindrical ring knife nesting Ginger sprouts were cut off ginger kim sprouts, made of semi-finished products with a root diameter of 1 cm and a length of 2.5 cm.
It is classified into aromatic Chinese medicine oil, medicinal Chinese medicine oil, and skin care Chinese medicine oil according to its efficacy.
Traditional Chinese medicine oils with aromatic smell, such as rose oil, jasmine oil, osmanthus oil, etc. Aromatic traditional Chinese medicine oil can be used in aromatherapy, through the sense of smell to stimulate the nervous system, achieve soothing mood, relieve stress, promote sleep, and other effects.
Rose oil has the effect of soothing mood, regulating endocrine, and can be used to relieve anxiety, depression, and other emotional problems; Jasmine oil has the effect of relaxing body and mind, improving concentration, and can be used to relieve fatigue and improve work efficiency.
Medicinal traditional Chinese oil
Traditional Chinese oils with medicinal effects, such as mugwort leaf oil, safflower oil, wind oil, etc. Medicinal traditional Chinese medicine oil can be used to treat various diseases, such as colds, coughs, rheumatic pain, and so on.
Artemisia argyi oil has the effect of warming the menstrual cycle, dispelling colds, relieving pain and itching, and can be used to treat dysmenorrhea, eczema, and other problems. Safflower oil has the function of promoting blood circulation, removing blood stasis, reducing swelling, and relieving pain, and can be used to treat injuries and sprains.
Chinese herbal oil for skin care
Herbal oils with skincare effects, such as olive oil, almond oil, Jojoba oil, etc. Skincare traditional Chinese medicine oil can be used to moisturize skin, keep skin moisture, prevent skin aging, and so on.
Olive oil is rich in unsaturated fatty acids and vitamin E, which have antioxidant and moisturizing effects on the skin and can be used to prevent dry skin, wrinkles, and other problems. Almond oil is rich in vitamins A and B, which have the effect of moisturizing skin, whitening and removing freckles, and can be used to treat dry skin, dark spots, and other problems.
Herbal Oil , Seeds oil, Peppermint Oil, Camphor Oil, Chili Oil, Ginger Oil
Shaanxi Changsheng Industrial Co., Ltd. , https://www.cncsbio.com