After the use of the constant temperature water bath, the cleaning method is as follows: 1. After each use, immediately clean the instrument 2. After each use, the water in the water bath is cleaned, and the coarse impurities in the water bath are lightly brushed off with a brush. Clear the pot. Wipe the inside and outside of the water bath with a soft cloth and dry with a cleaning cloth.
3. Effect evaluation: The inner surface of the device should be free of water, and the outer surface of the device should be bright and tidy, without smudging.
4. When the water bath is in use, it must be grounded reliably and the water should not overflow into the control box.
5. Do not water or the water level in the water bath is lower than the electric heating tube to prevent the electric heating tube from being damaged.
6. Perform maintenance inspection of the instrument once a month and fill in the maintenance record in time.
3. Effect evaluation: The inner surface of the device should be free of water, and the outer surface of the device should be bright and tidy, without smudging.
4. When the water bath is in use, it must be grounded reliably and the water should not overflow into the control box.
5. Do not water or the water level in the water bath is lower than the electric heating tube to prevent the electric heating tube from being damaged.
6. Perform maintenance inspection of the instrument once a month and fill in the maintenance record in time.
Rictron Industrial Co., Ltd , https://www.szrictron.com