Suitable fertilizer types
Urea. The 0.2%-0.3% urea solution was sprayed once before flowering, during flowering, and after flowering, which had a good effect on improving fruit set rate. Rare earth. Spraying 500 ppm of rare earth solution before flowering and full flowering can increase the fruit setting rate, but be careful not to mix it with alkaline fertilizers and pesticides. Boron fertilizer. A 0.2%-0.3% borax or 0.1%-0.2% boric acid was sprayed once every 3 weeks during fruit bud enlargement, flowering and flowering, which can increase the fruit setting rate by 15%-40%. Potassium dihydrogen phosphate. Li Shusheng spraying 0.2%-0.3% potassium dihydrogen phosphate solution during flowering can significantly increase the fruit setting rate.
Top dressing considerations
1. Pay attention to climate factors. The optimum temperature for pollination and fertilization of fruit trees is 22°C-25°C. When the temperature is lower than 22°C, the spray should be chosen close to noon. If the temperature is higher than 25°C, it is better to choose spray before 10 o'clock in the morning.
2. Select the best fertilizer for the characteristics of fruit trees. Jujube, hawthorn and small fruit varieties in apple, gibberellin spray flowering, can greatly increase the rate of fruit set. However, if used in Apple's Marshal, Fuji and other large fruit varieties, the effect of gibberellin is not as significant as molybdenum or boron fertilizer.
3. Pay attention to spray concentration. Flowering plants have low fertility, so the spray concentration during flowering is lower than before and after flowering. Especially in high temperature and dry climate conditions, the formulated concentration requirements are accurate, so as to avoid losses, especially the use of plant growth regulators.
4. Note the degree of fat atomization. The higher the degree of atomization of the fertilizer solution, the more uniform the spraying and the better the effect. It is not advisable to use a high-pressure sprayer to prevent the flower from being damaged due to too much pressure.
5. Reasonably mixed spray. Some mineral elements have antagonistic effects, such as nitrogen and potassium, copper, zinc; phosphorus and zinc, iron, copper; potassium and manganese, zinc, calcium, magnesium, etc., these elements are prohibited mixed spray, so as not to affect the effect. Gibberellin, naphthylacetic acid, etc. are acidic regulators, and can not be mixed with alkaline growth regulators or alkaline mineral fertilizers, pesticides, etc., so as not to reduce efficacy or produce phytotoxicity.
Disclaimer: Some articles in this website have been transferred from the Internet. If you are involved in third party legal rights, please inform this website. phone
Indoor monitor is one part of intercom system, and it is also a very important part. Video Door Phone and indoor monitor are connected in the same POE Switch to realize information transmission through local area network (LAN). When the visitor calls the indoor monitor on the video door phone, the indoor monitor will receive the call information in the corresponding apartment, the resident can check the situation at the door and see who is coming through the indoor monitor, and then can choose to talk with the visitor or not. The resident can choose whether to open the door for the visitor and if the resident knows the visitor, resident can also open the door for visitor directly through the indoor monitor. It is very safe and convenient and it can improve our quality of life while protecting our home.
Our indoor monitor is powered through the POE switch, no additional power supply is required, and the wiring is simple. Our indoor monitor uses linux system to work with our full digital video door phone, and the calling .monitoring and intercom are very stable and fast. At the same time, the indoor unit also has a variety of functions, which can monitor the video door phone at any time and view the environment at the door; support the connection of 8 defense zones, such as smoke detectors, doorbells, emergency buttons, etc.; support the connection of elevator control devices, which is very convenient and safe; support viewing visitors record, even if residents are not at home, they will not miss any information; the most special function is that it only supports mutual intercom, and each indoor unit can call and intercom each other, which is very convenient.
In the picture is our best selling indoor monitor - MK-888QFJ7F,
There are some specification of indoor monitor for your reference:
1. 7 inch Monitor
2. Calling, intercom, unlocking, monitoring
3. High quality screen with touch screen
4. Night vision, LINUX System
5. Ethernet RJ45 connector
6. Full Digital TCP/IP intercom
7. Check the log
8. Call the elevator
9. Eight defense zones
10. Support POE 24V non-standard POE switch
11. Dimension:215*136*17(mm)
12. Install Method : Wall/magnetic hanging Install
We are a factory specializing in the production, manufacture and research and development of video door phones with 11 years experience. Our factory is located in Zhuhai China. We have our own R&D team, we can provide professional products and services. We have different Access Control System products for different customers and markets, for example, Access Control Keypad.video door phone, audio door phone, 4-wire video doorbell and so on, if you are interested, please feel free to contact me, it is my pleasure to share our catalog with you.
Indoor Monitor,Video Doorbell,Security Camera Door Bell,Video Intercom Doorbell
Zhuhai Mingke Electronics Technology Co., Ltd , https://www.zhmkdz-electronics.com