The manufacturer of the verticality deviation meter manufacturer Sanquan Zhongshi was consulted by the customer. When the bottle is capped on the production line, the cover will be loose and the cover will be pressed, which will seriously affect the filling efficiency and greatly increase the production cost.
Verticality deviation tester
The domestic professional glass bottle verticality deviation measuring instrument manufacturer Sanquan Zhongshi technicians received the customer's demand, after analysis and discussion with the manufacturer, zui finally let the customer mail a batch of experimental bottles to test the bottle. Unsurprisingly, the deviation of the verticality of the glass bottle caused the above problems. The national standard "GB/T 8452-2008 glass bottle cans vertical axis deviation test method" specifies the method for determining the vertical deviation of glass bottles :
Bottle holder on the chassis in a horizontal rotating the dial gauge in contact with the bottle, rotation of 360 ° and a large value read zui zui a small value, that is 1/2 of the difference between the vertical axis deviation zui value and the small value zui Value. If a bottom plate with a V-shaped block is used, the sample is pressed against the V-shaped block, and a downward pressure is applied to the sample at a direction of 45° from the horizontal plane, and the glass jar is rotated 360°. Half the difference between the next zui zui Japan, vertical axis deviation is the measured value and the zui zui smaller value between the outer edge of the note of the bottle and the fixed point. The accuracy of the measured value shall be not less than 0.1 mm. The vertical axis deviation obtained from the actual measurement is corrected by the accuracy.
The following is the scientific experimental method for the vertical deviation of glass bottles given by the manufacturer of the vertical deviation meter manufacturer Sanquan Zhongshi:
The glass bottle verticality deviation measuring instrument of Jinan Sanquan Zhongshi Experimental Instrument Co., Ltd. adopts the fully automated experiment mode. It only needs to fix the bottom of the bottle to the rotating plate of the horizontal plate, so that the bottle mouth is in contact with the dial gauge, and the instrument automatically rotates 360. ° and a large value read zui zui a small value, that is 1/2 of the difference between the vertical axis deviation between the two values.
Article source: Jinan Sanquan Zhongshi Experimental Instrument Co., Ltd.
Foot Spa Massager,Bath Foot Massager Machine,Foot Spa Bath,Bath Foot Massager With Bubble
Huaian Mimir Electric Appliance Co., LTD , https://www.mimirfootbath.com