Shrink film packaging machine common problems occur

The shrink film packaging machine is a packaging equipment that wraps the product with a shrink film and then heats it to shrink the film and wraps the product tightly. It is widely used in industries such as food, beverage, medicine, and daily chemical industry. The main thing is to make a single, assembled or combined package of such products, and the products packaged by the shrink film packaging machine have an elegant appearance. In the process of daily use of the shrink film packaging machine, the following problems are prone to occur. Let's take a look at it.

The temperature rises slowly or cannot reach the standard packaging temperature.

The above problems can cause the packaging effect of the shrink film packaging machine to be less than expected. The heating process depends on the heater, so you should check the main power circuit of the heater first to check if the contacts of the magnetic switch are normal. If the magnetic switch is normal, check the meter again to see if the ohmic values ​​of each phase are the same as the machine. Normal is a short circuit. If each phase is turned on but the line or electric heating tube is still abnormal, the heater is damaged and a new heater can be replaced.

The shrink film packaging machine does not detect the product.

The consequence of not detecting the product is that the product is damaged and the packaging work cannot be performed normally. This situation is mainly caused by the gap between the combined packaging products affecting the detection of the electric eye, so it is only necessary to adjust the angle of the electric eye detection to an oblique angle.

The film is easily deflected and cannot be fed normally.

The above situation can be solved by adjusting the film roll position and the tension balance bar, the adjustment is invalid, and then the angle of the upper triangular plate is adjusted.