First, the main purpose
HSJ series three-dimensional swing is a novel material mixer widely used in pharmaceutical, chemical, food, light industry and other scientific research units. The machine can mix the powdery or granular materials with good flowability very uniformly, so that the mixed materials can achieve good results.
Second, the working principle
The working principle of the HSJ series three-maintenance oscillating mixer is different from that of the traditional rotary mixer. It makes a unique translation, rotation and rock movement in the three-dimensional space of the cube, so that the material is in the rotating cylinder - "rotating flow - translation - upside down A complex motion state such as a falling body, the so-called TURBULA state; produces an alternating pulse that continuously pushes the material, and the motion-induced turbulence has a varying energy gradient, thereby making each particle in the mixed material incapable. In the state of motion, each particle continuously changes its position in the frequent movement of the movement, resulting in a satisfactory mixing effect.
There are two points in the material mixing: one is the existence of centrifugal force in the mixing motion, which can cause segregation of the mixed material which cannot be density; the other is that the mixture is agglomerated and accumulated, so that the material cannot be effectively diffused. The blending, the motion state of the three-dimensional oscillating mixer overcomes the above drawbacks.
Third, structural characteristics
HSJ series three-dimensional oscillating mixer is composed of machine base, drive system, three-dimensional motion mechanism, mixing cylinder and electrical control system. The mixing cylinder that is in direct contact with the material is made of high-quality stainless steel material, and the inner wall of the cylinder is precision polished.
1, the base:
The machine base is made of steel of type, and the outer stainless steel surface is analyzed. The structure of the machine base is reasonable, and the machine can be effectively stabilized, which fully meets the GMP requirements of the drug.
2, the drive system:
The drive system of the machine consists of motor, transmission deceleration system, frequency converter, and control system. The design is concise, the transmission is stable and reliable, the inverter can effectively buffer the inertia of heavy-duty starting, and can accurately select the material for shutdown. The position of the tube is good for feeding or discharging.
3, 3D motion mechanism
In order to make the mixing cylinder can make complex translation, rotation and rock motion in three-dimensional three-dimensional space, the machine is designed with unique active and driven two-axis and two-axis three-dimensional motion rocker arm structure; the driven shaft is flexible design. Make the movement of the machine more flexible and lighter; debugging and maintenance are more convenient.
The Y-shaped three-dimensional motion rocker arm mechanism is made of all-stainless steel, polished and beautifully shaped, and can be used in 100,000 class 100 clean areas.
4, mixing barrel
The mixing drum of the machine is placed between two main spaces and the driven shafts which are connected by the Y model three maintenance moving rocker arms. The mixing barrel is fed by the barrel and the forward frustum, and the eccentric cone It consists of a discharge end, a feed port and a discharge device.
The mixing drum is made of high quality stainless steel, and the inner and outer walls are polished. The cylinder has good air tightness, smooth surface and no dead angle, no residue and easy to clean.
The feeding port is sealed by a clamp type flange, which is convenient to operate and has good air tightness.
The discharge adopts a uniquely designed confidence frustum. The asymmetric design is more conducive to the uniform mixing of the materials. When discharging, the discharge port is in the low position of the mixing container, and the material is discharged.
The discharge valve adopts the uniquely designed butterfly valve of the factory, which has good sealing performance, convenient discharging and no residue.
Fourth, the performance characteristics
1. Because the mixing bobbin has multi-directional movement, the mixing of the materials in the cylinder is more, the mixing effect is remarkable, the mixing uniformity is higher than the uniformity of the general mixer, and the uniformity error of the drug content is lower than that of the general mixer. . At the same time, the large volume of HSJ series three-dimensional motion mixer Zui is more than doubled to 40% of the total volume of the general mixer zui;
2. The mixing cylinder of HSJ series three-dimensional oscillating mixer is unique in design. The inner wall of the body is precision polished, no dead angle, no contaminant material, material is discharged smoothly under the action of self-weight, leaving no residual material, and it is non-polluting and easy to produce. Material, no accumulation of easy to clean and other advantages; 3, the material is mixed in a closed state, no pollution to the working environment;
4, the height is low, the swing space is small, the building (technical interlayer) generally does not need to be stinky, and the penalty area is small;
5. Low vibration, low noise, adjustable position, convenient installation and maintenance, and long service life.
Fifth, equipment installation
1. The machine is unloaded, loaded and commissioned before leaving the factory. It can be shipped from the factory after normal work, and it can meet the safe use of users.
2, transportation mode: 600 liters (including 600) using the whole machine factory, not preparing feet, bolts; 600 liters or more using split transport, preparation of feet, bolts.
3. Equipment installation:
A. The machine arrives at the user unit and should be safely unloaded. It is not allowed to impact or beat the equipment and accessories, because the installation accuracy of this machine is relatively high;
B. All the solid screws should be tightened before installation and the screws in the transportation process should be loose.
C. The installation floor should be flat (not flat <3/1000). After the device is in place, the shadow between the bottom four corners and the ground is eliminated to avoid shaking during operation;
D. Large equipment should be installed under the guidance of our factory technicians;
E. When the equipment is installed, open the front cover, turn the pulley by hand, run the balance and then turn on the power. Pay attention to:
(1) The steering of the main shaft coincides with the steering of the arrow. If it does not match, it can be adjusted by changing the phase of the power supply;
(2) The speed should be from slow to fast, balanced and not exceeding the specified speed.
F. If the rack is unstable during the no-load test, stop it. In the inquiry, add 10~16mm rubber shock pad to adjust;
G, no-load running time is not less than 10min;
H. After the no-load operation is normal, the test can be fed. The feeding should be from less to more test, and the load cannot be exceeded.
I. After the test of the whole machine is completed, it should be delivered to a person responsible for the operation and guide its normal operation knowledge;
J. Equipment maintenance: The lubricating oil, chain and lubricating grease should be replaced within three months after the new equipment is in operation, and replaced in the next six months.
Sixth, the principle of operation
1. This machine adopts electromagnetic speed regulation (or frequency converter speed regulation). Before starting the machine, turn on the main power supply, the power indicator light is on, then start the motor button, then start the on/off switch on the speed control panel (the inverter can press the touch button) , the indicator light is on, then slowly rotate to bring it to the normal mixing speed;
2. If the user needs temple mixing time, this item should be formulated in the contract. Our factory may install time relay to enable the user to specify the mixing time according to the mixing requirements of the materials;
3. After the mixing is finished, shut down according to the power-on sequence. If it is found that the material is not ideal, you can click the button to meet the blanking requirements.
Squid Flower,Frozen Calamar Flower,Frozen Octopus Flower,Frozen Pineapple Cut Squid Flower
Zhoushan Haiwang Seafood Co., Ltd. , https://www.haiwangseafoods.com