Azalea flower disease prevention and control method

(1) Symptoms:
The disease mostly harmed the roots, causing the roots to darken and rot, and the water above the ground was yellow. When the disease conditions are appropriate, the leaves will be acutely infected, and they will begin to lose their greenness from the leaf margins, become water-stained, and undulate at the disease-health junction, with a white mold layer on the back of the leaves. At this time, the branches can also be infected, brown, water-stained, and grow a white mold layer. In severe cases, the leaves or the whole plant die. Pathogens are present in the soil with the diseased body. Long-term flood irrigation, watering times, water, and heavy onset.
(2) Control methods 1 The breeding base for cuckoo seedlings should be cultivated with sorghum or covered with plastic film to reduce the contact with germs.
2 After the onset of disease, spray 70% EB phosphorous manganese zinc WP 50 times or 58% metalaxyl. Manganese zinc wettable powder 500 times, 70% Kelu wettable powder 600 times, 60% extinguishing grams Wet powder 800 times. Once every 10 days, control 2 or 3 times.
3 When the long-distance transportation is carried out in the north, it is appropriate to water before loading, but it should not be too much. Properly ventilated on the way to prevent moisture retention. If necessary, spray the fungicide before spraying. If the condition is heavy after unloading, it must be removed from the basin to make it wet as soon as possible.

The Elevator & Conveyor is used for gentle transit for wide variety of materials, both horizontally and vertically, from one equipment to another equipment.

They are able to handling granule materials, free flowing materials etc, often used in grain industry, food industry and mineral industry etc.

The Elevator & Conveyor we produced is often used in grain industry as accessory equipment for our grain processing equipment.

 

We have the following types of Elevator & Conveyor:

Dty Bucket Elevator

New Bucket Elevator

Slope Elevator

Z Type Bucket Elevator

Belt Conveyor

Auger-Type Elevator

 

Our DTY Bucket Elevator is vertical type, it has cups to transit granule materials, we have different capacity and height available for different purpose. Capacity 1-30t/h available .

The New Bucket Elevator is Japanese design, similar with Satake brand. It use low damage buckets, with gear motor to reduce grain broken rate, with high strength spring to adjust belt tightness. Currently only 10t/h model is available.

The Slope Elevator is zero damage rate elevator, it use soft and strong belt with flange on side, to prevent grain leak from sides. We have 3-5t/h model available.

The Z type Bucket Elevator is also zero damage rate elevator, it often used in grain, food and chemical industry.

The Belt Conveyor is widely used for bulk grain or transit bags that full of grains. It has different belt width and length available. Capacity can be from 5t/h to 60t/h.

The Auger-type Elevator is used for screw transit on grains like wheat, maize etc. it has inclined angle, which often used for feed bulk grain into equipment or transit between equipments. But it has high broken rate, so not suitable for seed.

Elevator & Conveyor

Bucket Elevator,Conveyor Machine,Seed Conveyor,Small Bucket Elevator

SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , https://www.seedgraincleaner.com