1. Put the medicine to be processed into a special non-woven bag, tie the mouth, put it in a container, and soak it in cold water for 30 minutes.
Clean the decocting machine, open the effluent valve, put clean water, close the effluent valve, close the effluent valve, put the soaked medicine bag into the medicine pot, and add the soaked liquid and water. Water addition ratio (for reference only): water addition = the required amount of liquid +20%. Calculation formula:
Water addition = (package capacity per bag × several times a day × a total of several drugs) × 1.2
For example: 5 doses of decoction, 2 bags per dose, per 180ml
Water addition = (180x2x5) x1.2 = 2160ml
2, the operation steps: put Chinese medicine and water in the decocting machine, cover the lid, tighten the handle, close the deflation safety valve, set the decocting time and temperature, press the heating button, the machine automatically heats, reaches the setting The temperature is automatically transferred to the simmer, and after the set time is reached, the heating is automatically stopped.
After the medicine is fried, first open the exhaust safety valve, decompress properly (to reduce the pressure to about 1kg), and then open the valve for discharging the liquid. The liquid is injected into the medicine tank of the packaging machine through the liquid discharging hose. In the middle, simultaneously rotate the pressing device to extrude the residual drug solution in the drug pack. After the liquid medicine is drained, fully open the exhaust safety valve, reduce the pressure to atmospheric pressure, open the handle to take out the medicine pack, turn off the power supply, and clean it for later use.
Specific operation steps: power → heating → stop → open the drain valve → squeeze → clean
Leading Laser Measure Module Factory in China
The World's First single transmitting single receiving design laser module, which has a big help to reduce producing cost and power consumption of the laser distance sensor.
This Laser distance sensor has high Accuracy up to ±1 mm, working as phase measure, which support RS232/RS422/RS485/Arduino to TTL communication.
This laser distance module is widely used in the Laser Distance Meter industry, also a very good choice for the Industrial applications. Most of measuring tools manufactures is purchasing from us in China.
Product Specifications:
|
Accuracy |
±1 mm (0.04 inch) |
|
Measuring Unit |
meter/inch/feet |
|
Measuring Range (without Reflection) |
0.03-150m |
|
Measuring Time |
0.1~3 seconds |
|
Laser Class |
Class II |
|
Laser Type |
635nm, <1mW |
|
Size |
45*25*12mm (±1 mm) |
|
Weight |
About 10g |
|
Voltage |
DC2.0~3.3V |
|
Electrical Level |
TTL/CMOS |
|
Frequency |
10Hz |
|
Operating Temperature |
0-40 ℃ (32-104 ℉ ) |
|
Storage Temperature |
-25~60 ℃ (-13~140 ℉) |
Range Sensor,Laser Distance Module,Distance Sensor,Laser Measure Sensor
Chengdu JRT Meter Technology Co., Ltd , https://www.cdlaserdistancemeter.com