Ordinary sprayer: Handle does not work. When the hand lever is compressed, if the pump is running out of water or not working, the cup is often shrinking, becoming hard or damaged, and the immersion oil or a new skin bowl should be removed; the atomization is bad. When the spray breaks, water vapor sprays out. The reason is that the outlet pipe in the barrel is welded and removed, and it can be removed by soldering. If the spray mist shape is not conical, the reason is that the spray hole is blocked, the nozzle hole is not round, the debris in the spray head can be removed, and the spray head piece can be replaced; The leakage of the spray bar is due to the welding or cracking at the weld joints, which should be repaired or replaced. Water leakage at each joint can be achieved by tightening the thread or replacing the gasket oil. If the switch leaks, the switch cap is loose; if the seal ring is damaged and the switch core sticks, it can be tightened, replaced, cleaned, and refueled. Mist: It is difficult to start. The floater chamber is not smooth due to the machinery being left unused for a long time and should be cleaned before use to ensure smooth oil passage. Stop after starting. Most of the reasons are that the platinum contacts of the ignition system are loose, stained or ablated. Zero large sandpaper or even a concise knife can be used to wipe the surface of the platinum surface and clean the platinum gap. Insufficient cylinder pressure. Due to greater wear. Replaceable with new piston rings, pistons or cylinders. Ordinary sprayer: Handle does not work. When the hand lever is compressed, if the pump is running out of water or not working, the cup is often shrinking, becoming hard or damaged, and the immersion oil or a new skin bowl should be removed; the atomization is bad. When the spray breaks, water vapor sprays out. The reason is that the outlet pipe in the barrel is welded and removed, and it can be removed by soldering. If the spray mist shape is not conical, the reason is that the spray hole is blocked, the nozzle hole is not round, the debris in the spray head can be removed, and the spray head piece can be replaced; The leakage of the spray bar is due to the welding or cracking at the weld joints, which should be repaired or replaced. Water leakage at each joint can be achieved by tightening the thread or replacing the gasket oil. If the switch leaks, the switch cap is loose; if the seal ring is damaged and the switch core sticks, it can be tightened, replaced, cleaned, and refueled. Mist: It is difficult to start. The floater chamber is not smooth due to the machinery being left unused for a long time and should be cleaned before use to ensure smooth oil passage. Stop after starting. Most of the reasons are that the platinum contacts of the ignition system are loose, stained or ablated. Zero large sandpaper or even a concise knife can be used to wipe the surface of the platinum surface and clean the platinum gap. Insufficient cylinder pressure. Due to greater wear. Replaceable with new piston rings, pistons or cylinders.
Pain Relief Patch For Neck Shoulder,Lower Back And Leg
Pain Relief Patch for neck shoulder, lower back and leg.
[Name] Medical Cold Patch
[Package Dimension] 10cm×12cm 2pieces/box
The pain relief patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application] For cold physiotherapy, closed soft tissue only.
[Indications]
The patches give fast acting pain relief for strains, sprains, cramp, bruises, swollen areas or joint stiffness.
[How To Use a Patch]
Tear off the packaging bag and remove the patch. Remove the protective film and apply the patch on the skin. One piece, one time. The curing effect of each piece can last for 8-12 hours.
[Attention]
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
[Storage Conditions]
Store below 30c in a dry place away from heat and direct sunlight.
Pain Relief Patch,Pain Relief Pad,Pain Relief Plaster,Neck Pain Relief Patch,Back Pain Relief Pacth
Shandong XiJieYiTong International Trade Co.,Ltd. , https://www.xijieyitongpatches.com