Everyone knows that semi-automatic blow molding machines are easy to use, so how should we maintain a semi-automatic blow molding machine?
Please check your exhaust time setting. If the exhaust setting is normal and it will fail every time you blow a bottle, you can judge the problem of the exhaust valve. Open the exhaust valve to check the spring and seal.
First, the mold should be opened, and the mold should be opened and closed manually. If it is normal, run it in the empty running state, if it is normal.
Please check your exhaust time setting. If the exhaust setting is normal and it will fail every time you blow a bottle, you can judge the problem of the exhaust valve. Please open the exhaust valve to check the spring and seal. There is also a phenomenon in which the exhaust sound is relatively loud or has a bad sound. If you are experiencing a lot of mold production and occasionally come over this kind of mold can not open the mold, please check whether the lock pin has a segment of the screw inside, in addition, please check whether the clamping force is too large, if it is too large, you should follow Standard re-adjustment.
When using a semi-automatic blow molding machine, you should also accurately install the mold on the blow molding machine. You should also carefully check whether the button is in the correct position, and also need to start according to the specified requirements.
For the blow molding machine, it is mainly used for the blow molding of plastic bottles. It can be used to blow plastic pellets or finished preforms into bottles by certain means, so that people can use various shapes of plastics in their lives. The bottle brings convenience. The blow molding machine mainly uses the oil-free airbag clamping technology to operate. It not only has a large clamping force, but also has less force and long life when the toggle is running. When people use the blowing machine, they should How to operate to make it easier and more convenient to extend the life of the blow molding machine?
1. When people use the blow molding machine, they should carefully check the power supply and control system of the blow molding machine, the heating system, etc., whether they are in the normal state, and for the part that needs to be added with lubricating oil, it is necessary to add an appropriate amount of lubricating oil to ensure The normal use and operation of the equipment
2. When using the blowing machine, you should also accurately install the mold on the blowing machine. You should also carefully check whether the button is in the correct position, and also need to start according to the specified requirements, debug or run, determine The machine is operating and working under normal conditions.
Glow In Dark Tape
Glow In Dark Tape
1. Material and classification of glow in dark tape
We have PET material glow in dark tape and PVC material glow in dark tape. PET material is cheaper but not printable. PVC material support customized printing with low MOQ.
For both materials, we have different kinds according to the glowing time it can last after full charging (0.5hours charging at least). We have 2hours, 4hour, 6hours, 8hours and 10hours according to the glowing period it can last.
2. Colors for choosing
We have light green, pink, orange, red, blue, white for choosing.
3. Features
a. Good ahesion, we use solvent acrylic adhesive, the adhesive is strong and long lasting.
b. Waterproof. Both PET and PVC material are waterproof. Can used for both indoor and outdoor usage.
c. Long service life: 2~3 years even for outdoor usage.
d. Different sizes for choosing: 1.24m x 45.7m log roll, or other customized sizes such as 25mm/ 50mm x 5meters/ 10yards/ 10meters/ 18meters, etc.
e, Accept die cuting to small pieces such as dots, stars, arrows, etc,
Glow Grip Tape,Luminous Adhesive Tape,Waterproof Glow In The Dark Tape,Glow In The Dark Reflective Tape
Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.jerrytape.com