The planter has improved the speed and quality of manual seeding and reduced the amount of seed used. Here is a brief introduction to the correct use of the planter.
First, you should check the plot before planting, and do your best to ensure the quality of the operation and the safety of the unit. Put the seed fertilizer in the proper position on the ground, reduce the time of adding seeds, add fertilizer, and improve work efficiency.
Second, the sowing unit should avoid parking when it is working. If it is necessary to stop the phenomenon of “broken strips†due to lack of seedlings, the planter should be raised and retreated to a certain distance before planting. When descending the planter, lower the tractor as it slowly moves forward. After the opener is placed in the soil, the seed drill must not be retracted to avoid clogging or damaging the opener.
3. When the ground turns, the planter should be suspended or the opener and soil working parts should be raised, the power of the seeding device and the fertilizer discharge device should be cut off, and the track marker should be raised before turning.
Fourth, the seeds must be clean and dry, and must not be mixed with straw or stones to prevent blockage of the seeding and affect the amount of seed.
5. The machine operator should always observe whether the work of each part of the planter is normal during work. In particular, it should pay attention to whether the seed metering device is arranging, whether the seeding tube is blocked or not, whether the opener is blocked by wet soil, and the work of covering the soil pressure roller. Is it normal?
Sixth, after broadcasting a crop, the seed box should be carefully cleaned to avoid seed mixing and cause seeding failure.
7. After use, it should be properly kept, and the spare parts, wearing parts, easy-to-drop parts and special tools brought by them should be properly kept.
Disclaimer: Some articles on this website are transferred from the Internet. If legal rights of third parties are involved, please inform this website. phone
Soiless Cultivation hydroponic pipe planting vegetables, the whole growth process does not touch the soil, can reduce more than 70% soil-borne diseases. Agriculture Facility can not only reduce the occurrence of pests and diseases, but also greatly increase the yield of vegetables. Through the three-dimensional cultivation mode, the land utilization rate can be improved, and the harvest yield is 2 ~ 3 times that of the open field planting. The whole set of cultivation facilities NFT Hydroponic Channel is placed in the ecological restaurant, office, living room and other places, which can not only pick and watch, but also increase the added value of its products.
Advantages of Soilless Culture
1.Save land,no soil is needed.
2.All the growing conditions can be controlled with machine.
3.Stable operation, long use life and high productivity.
4.Environment protection.
5.Plants grow healthier and easy to harvest.Widely used in Tomato And Cucumber Greenhouse and Glass Greenhouse
Nft Hydroponic Channel,Verticle Grow Towers,Hydroponics Green House,Greenhouse Hydroponic System Vertical
Qingzhou JuLong Agriculture Equipment Co.,Ltd , https://www.julonggrowtech.com