Zhucheng Haoshun Industry & Trade Co., Ltd.-We are engaged in the sales of turnover basket cleaning machines for many years. Our products are well received by customers and have a good reputation in the market. Let's take a look at the cleaning work and operating procedures of the basket cleaning machine :
1. The washing machine is divided into four sections. The * group is hot alkaline water, the second group is hot water, the third group is tap water, and the fourth group is disinfectant water. The hot water tank can be electrically heated or steam heated.
2. The water tanks are all sprayed and cleaned by stainless steel water pump. The baskets are sprayed and washed from multiple directions at the same time. Each water tank is equipped with a filtering device, which is convenient for cleaning the waste at any time.
3. The conveyor belt has stepless speed regulation and adjustable speed.
4. The two ends of the washing machine are sealed with water by soft curtains, which is convenient for cleaning and overhauling equipment at any time;
5. The electrical control box is selected by Delixi Electric Appliance, and all power is centrally controlled.
Our factory adopts various advanced technologies to flexibly design various structural products according to the needs, to meet the requirements of use, to make the products have good integrity, and to produce satisfactory products with high quality materials.
It needs to be operated correctly during use. The correct operation is the fundamental guarantee for extending the service life of the machine.
1. Turn on the main power supply, check if the drain valve is closed, and set the hot water temperature.
2. Open the inlet pipe valve. When the water fills the reservoir, the solenoid valve automatically closes to stop the water supply.
3. After the water in the reservoir is filled, open the steam pipe valve. When the temperature reaches the set value, the solenoid valve automatically closes to stop the steam supply.
4. After the water is full, press the “RESET†button and then press the “START†button to start the device.
5. It is forbidden to start the water pump before filling the water. The filter plate is often cleaned during the production process to avoid the water pressure lower than 4bar and damage the water pump.
6. When the card box phenomenon occurs in production, stop it in time and wait until the fault is removed before proceeding.
7. After the production is finished, stop the conveyor and water pump switch, close the steam valve and the water supply valve.
8. Open the drain valve for drainage and clean and disinfect.
The cleaning work and operating procedures of the turnover basket cleaning machine are introduced here for everyone. For more information, please visit our company, or let us know!
Titanium Alloy Dental Handpiece
Ningbo Siny Medical Technology Co., Ltd , https://www.sinymedical.com