Pure water filling production line workflow

Pure water filling production line introduction

The machine is a fully automatic multi-functional combined unit integrating flushing, filling and capping. It is suitable for automatic flushing, filling and sealing of various non-gas beverages, oil vinegar, fruit wine, mineral water and pure water. Unique design, novel style, complete functions, strong adaptability, convenient operation and use, beautiful appearance and high degree of automation. It is a good filling equipment for domestic Zui.

Pure water filling production line workflow

The bottle is transported by the bottle air delivery system to the three-in-one filling machine by dialing the star wheel. The bottle holder is mounted on the rotary disk of the bottle washer, and the bottle holder clamps the bottle mouth and turns 180° along a guide rail to make the bottle mouth downward. In a specific area of ​​the bottle washer, the nozzle sprays a sterilizing solution or water to rinse the inner wall of the bottle. After the bottle is rinsed and drained, the bottle is clamped and then turned over 180° along the guide rail to make the bottle mouth upward. The washed bottle is exported by the bottle washer and sent to the filling machine by the bottle wheel. The bottle entering the filling machine is held by the bottleneck holder stuck in the bottle mouth. The filling valve is lowered and raised by the valve lifting mechanism under the action of the cam. Filling is done by pressure filling. After the filling valve is lowered into contact with the bottle mouth, the filling process is completed. After the filling is completed, the filling valve rises out of the bottle mouth, and the bottle enters the capping machine through the card bottleneck transition dial. The anti-rotation knife on the capping machine catches the bottle neck and keeps the bottle upright and prevents rotation. The capping head keeps revolving and self-rotating on the capping machine, and realizes the capping, capping, capping and capping action under the action of the cam, and completes the whole capping process. The finished bottle is transferred from the capping machine to the bottle delivery chain through the bottle puller, and the three-in-one bottle machine is transported by the conveyor chain. The whole machine equipment is closed by closed window, the height of the sealing window is higher than the high point of the equipment, and there is an appropriate passage at the inlet and outlet, and an exhaust vent is left at the bottom of the sealing window.